Tips for Resetting DVR Stand Alone H 264 CCTV

Hello, let’s talk a little bit about this subject of DVR Stand Alone reset that is well commented on in other CCTV Forum by the users, we are going to pass some tips on which will help a lot, you know that often it is not even necessary to reset the equipment.

Tips for Resetting DVR Stand Alone H 264 CCTV

Tips for Resetting DVR Stand Alone H 264 CCTV

As we have several brands of DVR we will give some reset tips to follow:

Tip DVR brand Intelbras – you have to contact the company they will ask for the fill of two we have are them one is the responsibility term and the other is a term of possession of the equipment, done that Intelbras support generates a password For your device so that you can register a new administrator password.

Tips for Resetting DVR Stand Alone H 264 CCTV 1

Ecotronic DVR Tip – You can contact their support and try to update the DVR Firmware this will cause the equipment to come back without the mandatory administrator password since it is a factory configuration.

Tecvoz Tip DVR – You will update the Software of your equipment according to his model made so you will have the factory password again in your Tecvoz equipment this works one hundred percent with Tecvoz equipment they make available to the site for you to download the Software updating your equipment at the world wide web (or WWW) careful you are required to know the model of your device.

Tips for Resetting DVR Stand Alone H 264 CCTV 2

And for other brands and models of DVR equipment we recommend that you contact the support because they often pass physical reset of your device through the IC jumper command on the motherboard of the DVR Stand Alone.

Tips for Resetting DVR Stand Alone H 264 CCTV 3